CE认证规定其产品在欧盟成员国市场上自由流通,要求其产品所包含的所有指令通过*认证后,才能加贴CE标识。
电器类CE认证一般要求LVD、EMC,还应包括机械指令。因此费用不一样,CE认证选择指令也应参考顾客的意见和产品的自身情况。
CE认证的费用一般主要取决于客户的产品,不同产品涉及CE认证里面的指令不同,标准也是不同的,这些都涉及到费用的标准。
CE认证费用主要取决于选择的认证机构和产品的相关指令。CE认证分MD指令、EMC指令、LVD指令、PPE指令、MDD指令、PED指令等等;而且有些产品是分类别的,类别越高,收费就会越高,涉及的安全问题就越多,如:机械产品类,分普通和危险机械。不同的产品测试项目也截然不同,常见产品为电子电器、机械设备等,常见测试项目分类:EMC电磁兼容指令、LVD低电压指令。而机械产品CE认证费用远远**普通产品,所以CE认证费用问题牵涉到产品及参数。
想了解CE认证收费多少、收费标准的朋友们,务必提供给我们亚科*产品的名称、产品说明书、电路图、总装图、关键元器件清单、英文说明书等资料来确定产品所属的技术法规指令及标准。
FCC标识问题:
产品及包装上(或说明书)都需要FCC及IC标识,分别要求如下:
1.带无线遥控的产品上的标识:
A 发射产品上: ID XXXXXXXX.可以用贴纸或丝印等方式
B 接收部分的标识如下(30MHz以下的接收器不用加贴--参考FCC15.101):Trade Name:(品名或公司名) Module No. (产品型号)
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation.
C 包装或说明书(或吊卡)上的标识:WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures:
? Reorient or relocate the receiving antenna.
? Increase the distance between the equipment and receiver.
? Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
? Consult the dealer or an experienced radio/TV technician for help.
2.普通电子产品:
A 产品上的标识(与带无线遥控产品标识比较,少了产品编号及公司名称):This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
B 包装或说明书(或吊卡)上的标识:同带无线遥控产品的包装上标识